Menu
Röhren- und Pumpenwerk BAUER > Slurry Tech­nol­o­gy > Slurry Tankers > Dis­tri­b­u­tion and Incor­po­ra­tion Equipment
IMG_4798
Ground-level

Dis­tri­b­u­tion and Incor­po­ra­tion Equipment

In order to spread the fer­tilis­er value con­tained in the slurry with pos­si­bly low emis­sion loss, dis­tri­b­u­tion must be made direct­ly onto the soil with small­est pos­si­ble emis­sion surface. This can be achieved only by spread­ing — or better — by direct incor­po­ra­tion of the slurry in stripes into the soil. Manure dis­tri­b­u­tion in one working step with deposit­ing, slit­ting or incor­po­ra­tion is the only eco­nom­ic way of fer­til­is­ing. As a rule, the strip width depends on the track of the spray boom / crops. With 30m tracks, for example, a strip width of 15m makes sense, but can also be select­ed, for example, with a 30m hose appli­ca­tor boom togeth­er with a cor­re­spond­ing­ly large tanker. With ground-level spread­ing tech­nol­o­gy, you use addi­tion­al spread­ing time windows and save expen­sive mineral fer­tilis­er as the valu­able fer­tilis­er values in the slurry can be used better.

The con­fig­u­ra­tion of strip widths should always embrace the tanker size, the pumping capac­i­ty, the track length and the appli­ca­tion rate. — WE will cal­cu­late for you — tai­lored to your farm — the pur­pose­ful tanker sizes and strip widths.

envi­ron­men­tal­ly friendly

auto­mat­ed

easy control

Trail­ing Shoe Applicator
Hose Appli­ca­tor
Coulter Disk Injector
Slurry Short Disk Harrow
Slurry Cul­ti­va­tor
Trail­ing Shoe Applicator
Poly155_Farmer 15

Trail­ing Shoe Applicator

The trail­ing shoe appli­ca­tor has got trail­ing shoes of special design so that it can open the crop and deposit the slurry direct­ly onto the ground. The trail­ing shoe appli­ca­tor is espe­cial­ly designed for grass­land and stands, but can also be used in fields or stubble. Depend­ing on the tanker size, the trail­ing shoe appli­ca­tor is able to manage spread­ing booms with a strip width of up to 24m. The outlet hoses are 40mm thick and evenly sup­plied via one or two spread­er head heads and placed at a row dis­tance of 25 cm. A slope com­pen­sa­tion system opti­mal­ly adjusts the indi­vid­ual spring-loaded trail­ing shoes to the terrain. Drip­ping is pre­vent­ed by swiv­el­ling up the outlet hoses. Emis­sion losses are avoided by direct appli­ca­tion with a coulter pres­sure of approx. 10 kg on the ground. The spe­cial­ly devel­oped Alrena spread­er heads cut the fibres and ensure the system’s func­tion­al reli­a­bil­i­ty. Partial width shut-off is avail­able as an option and allows precise spread­ing without overlapping.

IN DIFFERENT TYPE SERIES

Stepped strip widths

type metre
UP Basic 6,0 / 7,5 / 9,0 / 10,5
Flex 5,3 / 6,2 / 7,5 / 8,8
Speedy ONE 7,5 / 9,0 / 10,5
Farmer 12,0 / 15,0
Multi 12,0 / 15,0 / 18,0 / 21,0 / 21,0 / 21,0–15,0 / 24,0 / 24,0–18,0
Hose Appli­ca­tor
IMG_8526

Hose Appli­ca­tor

The hose appli­ca­tor is the most uni­ver­sal spread­ing boom. The hose appli­ca­tor can be used in crops, grass­land, stubble and arable land. The slurry is deposit­ed direct­ly on the ground via outlet hoses with guiding springs which ensure the row dis­tance. Depend­ing on the tanker size, the hose appli­ca­tor is able to manage spread­ing booms with a strip width of 7.5m to 36m. The outlet hoses are 40mm thick and evenly sup­plied via one, two or more ExaCut spread­er head heads and placed direct­ly on the ground. The proven ExaCut spread­er heads cut the fibres and ensure the system’s func­tion­al reli­a­bil­i­ty. Drip­ping is pre­vent­ed by swiv­el­ling up the outlet hoses.  Partial width shut-off is avail­able as an option and allows precise spread­ing without overlapping.

IN DIFFERENT TYPE SERIES 

Stepped strip widths

type metre
BAUER SSGV 7,5 / 9,0 / 12,0 / 15,0 / 18,0
Swing Max3 21,0 / 24,0 / 27,0 / 30,0 / 33,0 / 36,0
Coulter Disk Injector
Scheibe 8,0m

Coulter Disk Injector

The coulter disk injec­tor has spe­cial­ly designed cutter disks that active­ly cut the soil and deposit the slurry direct­ly into the slit. The coulter disk injec­tor is espe­cial­ly designed for grass­land, but can also be used in crops or stubble. Depend­ing on the tanker- and tractor size, the coulter disk injec­tor can manage strip widths of 6.0m to 12.3m. The All Track Farmer is spe­cial­ly designed to be attached to slurry tankers of light­weight design so that the empty weight of the slurry tanker is kept as low as pos­si­ble. The outlet hoses are 50mm thick and evenly sup­plied via a spread­er head head and placed at a row dis­tance of 20 (18) cm. Drip­ping is pre­vent­ed by squeeze valves. The pairs of disks equipped with a self-steer­ing system, active­ly slit 20–60mm deep into the soil, thus reduc­ing nutri­ent losses. The spe­cial­ly devel­oped hor­i­zon­tal spread­er heads cut the fibres and ensure the system’s func­tion­al reliability.

IN DIFFERENT TYPE SERIES

Stepped strip widths

type metre
All­Track Farmer 5,2 / 6,0 / 6,8 / 8,0
All­TRack Profi  4,7 / 5,8 / 6,5 / 7,2 / 8,0 / 8,7 / 12,3
All­Track Mais 6,0 / 6,75 / 7,5 / 9,0
Slurry Short Disk Harrow
bau_gr

Slurry Short Disk Harrow

The Cerres S short disk harrow applies the slurry into the soil in one oper­a­tion. The 2 rows of toothed hollow disks apply the slurry flatly and easily into the soil. Main­te­nance-free, spe­cial­ly sealed bear­ings and a disk diam­e­ter of 510 mm make the Cerres S an eco­nom­i­cal imple­ment, spe­cial­ly designed to be attached to slurry tankers. The compact disk harrow can be used for stubble cul­ti­va­tion and in arable farming. Depend­ing on the tanker- and tractor size, the compact disk harrow can manage strip widths of 3.0m to 6m — up to 8.0m with Bauer self-pro­pelled tech­nol­o­gy. The outlet hoses are 50mm thick and evenly sup­plied via a spread­er head head and are placed behind the first disk row. Drip­ping is pre­vent­ed by swiv­el­ling up the boom arms. The ser­rat­ed large disks of the second disk row apply the slurry under the soil and thus con­sid­er­ably reduce nutri­ent losses. The spe­cial­ly devel­oped hor­i­zon­tal spread­er head cuts the fibres and ensure the system’s func­tion­al reli­a­bil­i­ty. The depth guid­ance is set either by guide wheels or a tube roller. The tube roller recon­sol­i­dates the soil and opti­mis­es the working pattern.

IN DIFFERENT TYPE SERIES 

Stepped strip widths

type metre
Cerres S‑pro T 3,0 / 4,0 / 5,0 / 6,0
Cerres S‑pro R 3,0 / 4,0 / 5,0 / 6,0
Slurry Cul­ti­va­tor
IMG_1275

Slurry Cul­ti­va­tor

The Cerres G is a large spring tine harrow cul­ti­va­tor spe­cial­ly designed for slurry incor­po­ra­tion on a slurry tanker. Two types are avail­able: the light cul­ti­va­tor “L” and the heavy cul­ti­va­tor “S” which have been spe­cial­ly devel­oped as slurry cul­ti­va­tors for slurry tankers and incor­po­ra­tion in one oper­a­tion. The two-row design com­bined with a high frame clear­ance ensures good mate­r­i­al flow. The Cerres G is equipped as stan­dard with spring-loaded tines with reversible coul­ters which loosen the soil well. The slurry cul­ti­va­tor can be used for stubble cul­ti­va­tion and in arable farming. Depend­ing on the tanker- and tractor size, the slurry cul­ti­va­tor can manage strip widths of 3.0m to 6m. The slurry is deposit­ed under the soil direct­ly behind the tines via 50mm injec­tion pipes. The row dis­tance of only 30 cm ensures that the plants are sup­plied with nutri­ents over the entire area. The 450/620 mm diam­e­ter tube roller behind the tine serves to control the height, to level and crumble the clods of soil and to slight­ly recon­sol­i­date the loos­ened soil. The spring-loaded sturdy tines apply the slurry under the soil and thus con­sid­er­ably reduce nutri­ent losses. The spe­cial­ly devel­oped Dosimat spread­er head cuts the fibres and ensure the system’s func­tion­al reli­a­bil­i­ty. The depth guid­ance is set either by guide wheels or a tube roller. The tube roller recon­sol­i­dates the soil and opti­mis­es the working pattern.

in dif­fer­ent type series

Stepped strip widths

type meter
Cerres G — L 3,0 / 4,5 / 5,1
Cerres G — S 5,1 / 6,0
Ques­tions about Dis­tri­b­u­tion and Incor­po­ra­tion Equipments?

CONTACT

Contact

    * Please note, that field marked with * have to be filled out.
    thomas perlik

    Thomas Perlik

    Product Manager — Slurry Tanker